Adenso WHM for 200, 300mm and special format substrates
- WHR WaferHandling.Robot
- Vacuum chamber with 4 to 8 ports
- LLM LoadLock.Modules
- STEALTH.CARRIER
- WAM WaferAlignment.Modules
The Adenso Cluster.Operating system for control of the VAC.ROBOTICS platform:
General requirements
WHM-VAC-4PS:Adenso WHM WaferHandling.module for 200mm or 300mm wafers with 4 loading ports
WHM-VAC-5PS:Adenso WHM WaferHandling.Module for 200mm or 300mm wafers width 5 loading ports
WHM-VAC-6PS: Adenso WHM WaferHandling.module for 200mm or 300mm wafers with 6 loading ports
WHM-VAC-7PS:Adenso WHM WaferHandling.Modul for 200mm or 300mm wafers width 7 loading ports
WHM-VAC-8PS:Adenso WHM WaferHandling.Modul for 200mm or 300mm wafers with 8 loading ports
Robot.Configurator –
Now compile your new cluster tool easily with the ROBOT.Configurator.
WHR WaferHandling.Robot – the basis for handling and automation
The Adenso WHR WaferHandling.Robot is the heart of our modular VAC.ROBOTICS platform. The Adenso.WHR undertakes tasks for handling sensitive and large substrates in vacuum robotics (industrial VacBot) and is optimised for maximum load capacity and large ranges. The simple arm geometry allows small gate valves and compact handling rotation areas.
Your advantages at a glance
- RANGE: Largest traversing distances – maximum flexibility
- PAYLOAD: Maximum loading capacity – unlimited substrate selection
- GATE VALVE: Intelligent kinematics – smallest gate valve
- FOOTPRINT: Space-saving kinematics – smallest installation space
- COMPLEXITY: Keep it simple with Adenso – save space and money!